|Frequency:||50Hz/60Hz||Other Service:||OEM/ODM Offered|
LoRa Smart Meter Wireless Remote Three Phase Four Static Electric Digital Meter
|Operating Voltage||80%~120%(Rated Voltage)|
|Current||1.5(6)A, 5(20)A, 5(30A), 5(40)A, 5(60)A, 10(40)A, 10(60)A, 15(60)A, 20(80)A|
|6400, 3200, 2400, 1600, 1200, 800, 400, 200|
|Clock Accuracy(optional)||≤ 0.5s/Day (Refer to temperature of 23 centigrade);|
|Data Storage Period||≥ 10 years, the working time lasts more than 5 years even if power off .|
|Power Consumption||≤ 0.8 W*3|
Normal operating temperature: -25℃ to + 55℃
Limited operating temperature: -40℃ to + 70℃
Precise metering of active electric energy
Remote reading of real-time electric quantity through low-voltage line
Remote switching-in and load control, indicating of power-up or power-off
Mutual auto relay
LCD, power failure flashing
Freezing of electric quantity, daily frozen electric quantity kept for 7 days; Daily hour total active power meter code stored for 3 days;
Multi-rate and stepped electric energy supported
Three modes switching supported: Normal, stepped rate, time shared rate
Alarming of loss of phase, current loss, and overloaded power off, overpower load value settable
Event recording, recording of programming, timing, tripping, dumping, and uncapping events
IR communication, RS485 communication, and power carrier communication supported
IR and power line carrier programming available
Low-power consumption, high-performance micro processor used, simply structured, stable performance, ensuring long safe and reliable operation.
Precise metering of active electric energy, no calibration required for long time.
Auto freezing of data such as electric quantity and meter state on the hour or at 0: 00 a. M. Each day, and auto storing of data for reading.
Spread spectrum mode used for power carrier communication, providing reliable and precise data transmission, routing depth up to 7 levels.
After power off, data capable of being stored for 10 years or more
Receiving of auto clock calibration of ranged concentrator or performed in the system.
Introduction of LoRa communication mode:
LoRaWAN communication mode for meter reading and parameter setting.
When reading the meter, you can use the meter data remote transmission software provided by our company to read the meter and set the parameters. According to the power industry standard DL / T 645-2007 (supporting part of the communication protocol), software and hardware systems that fully meet the protocol requirements can be designed for meter reading and parameter setting.
LoRaWAN is a set of communication protocols and system architectures designed for LoRa long-distance communication networks.
When the module is powered on, it automatically sends a join packet. If no reply from the gateway to the network, the join packet will be sent in intervals. After the module receives the network access permission message by the gateway, it pushes a packet of heartbeat data; Since then, it starts timing. Actively push a pack of heartbeat data at intervals of 6 hours.
LED from left to right in sequence are indicating
-Pulse (RED color);
-Power supply and credit status(bi-color, normal status in GREEN, low credit status in RED and blinks);
-Alarm / Tampering (YELLOW color).
Reliable Design: It is a generation of products with keypad to input encrypted numbers, STS compliant.
Standard: IEC 62052-11, IEC 62053-21, IEC 62056-21
Anti-Tampering Detection: Terminal cover and top cover open detection.
Resistance on High frequency jamming circuit
Prevention of Missing Potential
Resistance on neutral disturbance
Using uni-directional counter system
1. Q: Are you trading company or manufacturer ?
A: We are factory.We are not only a factory,but also solutions provider and meter designer.
2. Q: Do you have a catalogue? Can you send me the catalogueto have a check of all your products?
A: Yes , We have product product list. Please contact us online or send an Email to sending the catalogue.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample ,but not free
4. Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-35 days if the goods are not in stock, it is according to quantity.