|Rated Voltage:||220V||Operate Voltage:||70%~120%(Rated Voltage)|
|Rated Current:||5(40)A, 5(60)A||Accuracy Class:||1.0; 2.0|
|Rated Working Frequency:||50Hz/60Hz||Pulse Constant(imp/kWh):||1200, 2400, 3200, 6400|
DDS155 LoRaWAN Smart Meter , 2P DIN Rail Single Phase Elecrtric Meter
DDS155G2R-LoRaWAN single phase DIN electric meter is an all-digital electricity metering and monitoring IoT product developed by our company. It adopts SOC high integration V9821S chip, with active energy metering function, online display, intelligent anti-theft, remote centralized meter reading and other functions. Data is transmitted to the corresponding gateway through the LoRaWAN wireless ad hoc network. It adopts 2P DIN Rail type meter case design, which has the advantages of small size, high precision, low power consumption, good stability and convenient installation. It can be widely used in city, country or any enterprise.
G2R: 2P DIN Rail single phase electric meter, LoRaWAN, External antenna
RT1: LoRaWAN Module Work Frequency: 470Mhz /868Mhz /923Mhz….
Main functions and features:
1. Using SOC microcontroller V9821S: enhanced 8052MCU core, energy metering
capability, integrated analog front end, RTC module, LCD driver, FLASH, accurate
measurement and display of active energy.
2. Measurement: It can measuring positive and reverse active energy, which can display and store its data.
3. Energy monitoring: It can monitor the combined total active power, positive active total power, reverse active total power, voltage, current, active power, grid frequency, power factor, and meter running status word.
4. With LoRaWAN wireless ad hoc network to transmit data to the corresponding gateway, upload data actively and the default interval is 10 minutes (time can be set, upload data: combined active total power, positive active total power, reverse active total power , voltage, current, active power, grid frequency, power factor, meter operating status word).
5. Communication protocol: DL/T645-2007.
6. Wireless communication, LoRaWAN wireless automatic networking, construction is convenient.
7. It adopts 2P rail type case design, which is small in space and easy to install.
Main technical parameters:
|Normal working temperature||-25℃~+60℃|
|Limited working temperature||-40℃~+60℃|
|Relative humidity||<85% normally, 30 days in a year (naturally distributed) can achieve 95%|
Main terminal and auxiliary terminal
The main terminal wiring is as shown in the figure above, where No.1 is the phase line, No.4 is the phase line, and No.2 is the zero line and the zero line out of the common end. No.7 and No.8 is the metering pulse output.
Display and appearance
LCD display interface
After power-on, the LCD screen is fully displayed for 5 seconds, and then the current active energy (W) is displayed, and the current active power (P) is displayed alternately. The display interface is shown below.
QR code: Including product model, product communication address, product specifications (voltage, current), communication protocol.