Payment & Shipping Terms:
|Voltage:||220V/230V||Current:||1.5(6)A, 5(10)A, 10(40)A, 20(80)A, Etc.|
|Frequency:||50/60Hz||Accuracy Class:||2.0, 1.0, 0.5S; 2.0(Reactive Power)|
|Pulse Constant:||6400, 3200, 2400, 1600 Imp/kWh, Etc||Power Consumption:||≤ 0.8W/phase|
|Clock Accuracy:||≤ 0.5s/Day (Reference Temperature 23℃)||Data Storage Period:||≥ 10 Years|
220V 3200imp/Kwh Active Energy Meter Single Phase Electronic Meter With LCD Display
Single phase electric meter is a digital intelligent metering with intelligent and reliable design. Imported single-chip which controlled by microcomputer, perfect power source and electromagnetism compatible design.
|Standard||IEC 62053-21:2003, DL/T645-1997/2007|
|Environmental temperature||-10℃ ~ +50℃|
|Limiting ambient temperature||-25℃ ~ +65℃|
|Relative humidity||≤ 85%|
|Power consumption||≤ 0.8W/phase|
|Reference Voltage||Basic current (maximum rated current)(A)||Accuracy||Wiring method|
|220V||1.5(6)A, 5(10)A, 10(40)A, 20(80)A, etc.||2.0, 1.0, 0.5S; 2.0(Reactive Power)||Direct type|
1. Product's Type: Register (5+1), LCD (5+1 or 6+1).
2. Communication Mode: Infrared, RS485 interface or carrier communication module(Optional).
3. Electric Power Measurement: Positive active power, reverse active power and power in A, B, C phase which can be measured.
4. On-Off Manner: Build in or external switch can be optional.
1. Owning forward and reverse direction metering function, besides, it can accumulate electric quantity in one same direction, that is, calculation reverse electric quantity into forward direction.
2. The electric quantity adopts displaying, of which there are five integer-places and two decimal-place while also can be six integer-place and one decimal-place, its unit is kilowatt-hour, making record of accumulated total electric power consumption.
3. When electric energy meter is communicated with external equipments, the communication indicator lamp would be brightened, which stands for that the electric energy meter stays at communication state.
4. Own passive isolated type electric energy impulse output terminal, the impulse output is square wave, and the impulse width is not smaller than 80ms±20%.
5. The parameter programming (RS485 or the infrared programming, setup , reading meter) be able to setup the number (address) of ammeter, active electrical energy initial reading, the password and so on.
6. Multi Tariffs: With 2 sets of tariff, total support 8 tariffs at most. The minimum time interval is 15 minutes for periods, which can be set over 0:00am.
7. Measuring: Real time measuring and display current voltage, current, power, power factor and frequency, it can also display the operating parameter such as direction of power.
1. Q: Do you have a catalogue? Can you send me the catalogueto have a check of all your products?
A: Yes , We have product product list.Please contact us online or send an Email to sending the catalogue.
2. Q: I need your price list of all your products, do you have a price list ?
A: We do not have a price list of all of our products. Because we have so many items,and it’s impossible to mark all of their price on a list.And the price are always changing because of the producing cost.If you want to check any price of our products, please feel free to contact us.We will send offer to you soon!
3. Q: I can find the product on your catalogue, can you make this product for me?
A: Our catalogue shows most of our products,but not all.So just let us know what product do you need,and how many do you want.If we do not have it,we can also design and make a new mould to produce it.For your reference,making a ordinary mould will take about 30 days.
4. Q: Can you provide samples ?