Payment & Shipping Terms:
|Product Name:||Single Phase Two Wires Electric Meter||Refer. Voltage:||127V/230V|
|Refer. Current:||5(30)A, 10(60)A, 20(100)A||Display:||Register|
|Constant:||3200 Imp/kWh, 1600 Imp/kWh||Life Time:||More Than 10 Years|
Two Wires Single Phase Electric Meter Active Energy Measuring With Register Display
DDS155single phase electronic power meter (LCD display) is a full electronic energy meter to measure the single-phase AC active power at 50Hz or 60Hz. Rated Current 10(40)A.
This product conforms to GB/T 17215.321-2008 standard.
Function and Features
1. Use imported chips with high precision which could precisely calculate active two-way power;
2. With reliable start-up and creep performances;
3. All meter lines are supplied with transformer power, which greatly improves the stability and service life of the meter;
4. With the protection from the harmonic wave and high-frequency pulse interference;
5. With protection measures against power grids interferences (lightning) ;
6. Shows a number of recycled information (including electric quantity, constant, meter number, etc.);
7. Using broad-temperature LCD which could display normally between the temperature from -30 to 70;
8. While Communication configuration, it can be through infrared or RS485 interface to read meter information (including electric quantity, constant, meter number, etc.), with stable communication performance and 100% of the success rate of meter reading;
9. When the LCD is equipped with clock configuration, the meter has clock's function, with high precision when it is powered by inside battery. It can block electricity according to the user's configuration, preserve the current electricity and the frozen electricity data of the past 12 months. It can record the reverse electric quantity and its starting and ending time of the last three times. It can also record the programming content and time of the last three times. It is facilitated with power indicator light. When the meter has the power, the light turns on. The installation sizes are in accordance with DD862 Single-phase mechanical meters, with full transparency of the upper cover and elegant appearance;
10. It can be formulated according to customer demand of infrared or RS485 communication type, clock type, or relay-controlled type.
Main technical parameters
|Item||type||Rated voltage (V)||Rated electric current (A)||Precision level||Connection type|
|Single phase electronic electric energy meter (LCD display)||DDS155||220||1.5 (6)||1.0 or 2.0||Mutual Induction|
|1.5(6),2.5(10)||1.0 or 2.0||Direct|