GPRS Power Quality Monitoring Equipment For Energy Management System

GPRS Power Quality Monitoring Equipment of Office Buildings for Energy Management System

a.) Number of input channels
Max. 24 channels/device (configurable as voltage or current input)

b.) Measured values:
- instantaneous value of voltage
- instantaneous value of current

c.) Calculated values
- RMS voltage
- RMS current
- Apparent power
- Active power
- Reactive power (incl. capacitive/inductive indication)
- Power factor

d.) Averaging period for calculation: 1 min.

e.) Built-in GSM module for realizing GPRS communication using different protocols (FTP, http, SNMP) with capability of SMS sending function, special warnings as required and defined by the customer

f.) Built-in flash memory to prevent data loss (min. 16MB NOR flash) with microSD support

g.) Large number of configurable alarm possibilities (power cut, overcurrent, overvoltage, capacitive/ inductive reactive energy is over the threshold value, etc.) according to the customer’s needs

h.) Upload periods of calculated values to remote server: 10 min. … 24 hrs. (configurable)

i.) All parameters and the firmware can be updated remotely via the main wireless communication interface (GPRS/WiFi)

j.) Protection
- Voltage measurement overload (1 min.): 1.5 × Vn
- Voltage isolation: 2kV RMS (1 min., 50Hz)
- Pulse overload capability: 1kV (8/20us)
- Thermal protection
- Housing: IP65


Optional functional:
Saving time domain functions of current and voltage (all measured instantaneous values are stored) in case of power cut or other alarm events (min. 0.2s /10 period/, max. 5 sec, according to the sampling frequency and the number of input channels)