Payment & Shipping Terms:
|Voltage:||220V/230V||Current:||1.5(6)A, 5(10)A, 10(40)A, 20(80)A, Etc.|
|Frequency:||50/60Hz||Accuracy Class:||2.0, 1.0, 0.5S; 2.0(Reactive Power)|
|Pulse Constant:||6400, 3200, 2400, 1600 Imp/kWh, Etc||Power Consumption:||≤ 0.8W/phase|
|Clock Accuracy:||≤ 0.5s/Day (Reference Temperature 23℃)||Data Storage Period:||≥ 10 Years|
Single Phase Watt Hour Meter,
Single Phase Energy Meter
220V / 240V Kwh Meter Single Phase Smart Electric Meter with Fully Sealed Design
Single phase electric meter is a digital intelligent metering, the most advanced single phase electronic watt hour meter that uses large integrated circuits. It uses digital sampling and SMT technique which is suitable for measuring active energy in electric net with single phase Alternating Current 50Hz or 60Hz. A Liquid Crystal Display (LCD) is used for the register. The meter must be mounted on a location with temperature range of -25C~+55C and relative humidity not exceeding 95%. The air should be free of harmful gases, dust, mildew, insect, etc.
|Active Energy||Class 1.0|
|Power Loss||Voltage Circuit||≤1.5W,10VA|
|Limit Working Temperature||-40ºC~+80ºC|
|Display Page||5(with electric);1(without electric)|
1. Product's Type: Register (5+1), LCD (5+1 or 6+1), LED (5+1)
2. Electric Power Measurement: Positive active power, reverse active power and power in A, B, C phase which can be measured.
3. Intelligent Design: Imported single-chip which controlled by microcomputer, full digital metering, with advantages of high accuracy, good linearity, wide range, low consumption and prevent from electricity stolen.
4. Reliable Design: Perfect power source and electromagnetism compatible design, which are suitable to the strong electromagnetism disturbance and big occasion of power source fluctuation.
5. Cover to Meter: Fully sealed dustproof and waterproof design, material of cover has excellent flame retardant and anti-corrosion, anti-aging properties.
6. On-Off Manner: Build in or external switch can be optional.
7. Communication Mode: Infrared, RS485 interface or carrier communication module(Optional).
Single-phase Static Energy Meter is used to measure 50Hz or 60Hz active energy consumption from single phase AC electricity net.
The meter adopts LSI(Large-scale Integration) and SMT manufacturing technique, the key components and part all adopt long life type.
With the features of good reliability, small volume, light weight, specious appearance, etc., the meter is widely used in office buildings, shoppping malls, residences, airports and metro, etc.
*Front board three fixed installation, the casing is made of high definition material such as ABS anti-flaming material, PC etc., and the terminal is made of bakelite which is moisture-resistant, fire-retardant, high temperature molded overall.
*5+1 or 6+1 digits cyclometer display, (Entirely closed register, HF magnet immune register, unidirectional step motor type impulse register optional). May select LED or LCD display(Standard LCD, or backlight LCD, can select a maintenance-free lithium battery, used to display when power failure.)
*Standard configuration one port of pulse output passive (polarity), may select increase a distant port of pulse output passive(nonpolarity), complying with standard IEC 62053-21.
*LED instructions power supply state, signal of energy impulse and current reverse.
*Single deirection measures single phase two wire active power consumption. May select to measure single phase three wire. It is nothing with direction of the flow of load current, complying with standard IEC 62053-21. IEC62052-11.
*Adopts high reliable and long-life electric components, hioverload, do not need to calibrate for long-term operation.
*Direct connect operation, there are two types wiring you may select.
*Extended or short terminal cover.
Reliable Design: It is a generation of products with keypad to input encrypted numbers, STS compliant.
Standard: IEC 62052-11, IEC 62053-21, IEC 62056-21
Anti-Tampering Detection: Terminal cover and top cover open detection.
Resistance on High frequency jamming circuit
Prevention of Missing Potential
Resistance on neutral disturbance
Using uni-directional counter system
1. Q: Are you trading company or manufacturer ?
A: We are factory.We are not only a factory,but also solutions provider and meter designer.
2. Q: Do you have a catalogue? Can you send me the catalogueto have a check of all your products?
A: Yes , We have product product list. Please contact us online or send an Email to sending the catalogue.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample ,but not free
4. Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-35 days if the goods are not in stock, it is according to quantity.
Contact Person: Mrs. Ada Yang