Payment & Shipping Terms:
|Standard:||IEC 62052, 62053, 62056||Elements:||Single Phase Two Wires|
|Accuracy:||Class 1.0||Communication Mode:||PLC, Wifi, Carrier, GPRS|
|Baud Rate:||2400bps||Display Digit:||6+2 LCD|
domestic electric meter,
digital smart meter
AMR System Smart Electric Meter Single Phase Two Wire RS485 Communication DLMS / COSEM
DDZY150 single phase local fee control smart meter is a intelligent electricity metering product, which suit for measuring 220V/50Hz single phase active AC power. It has independent optical and RS485 interface, and also with standard interface of carrier communication module, which can work with carrier communication module from different suppliers. It can support for fee control function. With advantages of high reliable, high accuracy, long life, wide range and etc, it can widely used in city, country and enterprises where need to measure single phase AC power.
Standard: IEC 62053-21 Electricity metering equipment (a.c.) –Particular requirements –
Voltage Circuit Consumption(Under Communication Status) ≤3.0W, 12VA
Current Circuit Consumption ≤1VA(Ib)
Month Average 95%
600bps, 1200bps, 2400bps, 4800bps, 9600bps (Can be set)
＊ Use only isolated tools.
＊ Do not connect the meter to a 3 phase - 415V AC - network.
＊ Place the meter only in dry surroundings.
＊ Make sure the used wires are suitable for the max current the meter can measure.
＊ Make sure the AC wires are installed correctly before activating the current/voltage.
＊ Do not touch the meter connecting clamps directly with your bare hands, with metal, blank wire or other material as you will have the chance of an electricity shock and a possible chance for health damage.
＊ Make sure the protection cover is placed after installation and has been sealed.
＊ Installation, maintenance and repair should only be done by a certified electrician.
Contact Person: Mrs. Ada Yang