Payment & Shipping Terms:
|Refer. Voltage:||3* 220V/380V||Refer. Current:||3*5(100)A|
|Accuracy Class:||Active CL 1.0, Reactive CL 2.0||Real Time Clock:||Build In|
|Capacity Of Li-ion Battery:||More Than 1.2Ah||Life Time:||More Than 10 Years|
digital smart meter,
smart power meter
DTZY150C Three Phase AMR System Smart Electric Meters With DLMS / COSEM Protocol
DTZY150C Three Phase Fee Control Smart Electric Meter is a smart metering device with special design for nation smart grid. With independent infrared, RS485, carrier communication and IC card interface, it can support for remote or local fee control function. The meter has advantages of high accuracy, good linearity, wider range and long life, which can widely used in city, country or school and any enterprise.
Function and characteristic:
1. Measure ford direction,reverse direction and 4 quadrants reactive power and max demand,the time of max demand occurs.
2. Spit phase power measuring.
3. 4 rates,4 time zones,6 time period,10 day time,12 public holidays.
4. Record loss voltage,loss current.
5. The data can be congeal auto and record data of l2 months.
6. The active forward & reverse direction and the reactive 4 quadrants output via pulse. The pulse width can be setup by controller or Rs485.
7. The infrared controller will display the item.
8. It can be mounted the meter key stoke-display or circule-display when power is off A11 the data can be setup by controller of software.
9. Recording affairs parameters function.
10. Meter reading function at power off.
11. Recording the load.
12. It is easier of electric department centralized management.
13. Alarming overload function.
14. Transformer magnification can be setu.
15. A11 the data and information can be displayed via LCD.
16. Measuring the voltage,current,power of the each meter all the time.
17. It has the recording feature of loss voltage,loss current,coincidence rate of the voltage,power off,programmer,adjust the time and so on.
18. It has the function of program forbid and demand replacement.
19. Power break awakening function.
20. Two sets of Battery,one(3.6V)is used for keeping data,and another(6V)is used for copying They are easier to change
Main Technical Parameters:
|Accuracy Class||Class1.0, Class2.0|
Current transformer input0.2%Ibclass1.0, 0.3%Ibclass2.0
Direct input0.4%Ibclass1.0, 0.5%Ibclass2.0
Current transformer input3×1.5(6)A
Direct input3×5(20)A,3×10(40)A ,3×15(60)A,3×20(80)A,3×30(100)A
|Voltage Loop Consumption||≤1.5W (5VA)|
|Current Loop Consumption||≤1VA|
Wuhan Radarking Electronics Corp. is a modern share enterprises which focusing on the smart Internet of things(IOT) /smart grid energy consumption sensor/intelligent electric safety integrated solution. It established in 2002(former name: Wuhan Radarking Co.,Ltd.)and went public on January 27, 2015 with the stock abbreviation RADARKING and stock number 831722. It owns the independent R&D center and factory which is the key recommended high-tech enterprises in Wuhan city.
It mainly R&D, manufacture and sell the integrated solution of smart Internet of things(IOT) energy consumption sensor/smart grid energy consumption sensor/energy consumption information acquisition and transmission(Collector, Concentrator, Communication Module), smart electric meter, smart water meter, “RDK” energy Internet of Things(IOT) intelligent energy safety integrated solution, digital campus energy consumption acquisition(meter reading) charging management integrated solution, 4-in-1 Meter energy consumption acquisition(meter reading) charging management integrated solution, 4-in-1 Meter/All-in-One Card cloud computing total charging management integrated solution, energy consumption monitoring and analysis integrated solution, mobile phone APP(Energy Consumption, Fast E Top Up).
Contact Person: Mrs. Ada Yang